Search Results

You are looking at 1 - 10 of 18 items for

  • Author or Editor: Z. Lin x
  • Refine by Access: All Content x
Clear All Modify Search

Abstract  

Effects of nano-metal powders (aluminum and nickel) addition on the thermooxidative degradation of binder PEG in air atmosphere from 20 to 350°C were studied by TG/DTA and in-situ FTIR. TG/DTA results showed that the addition of nano-Al slowed down the degradation process of PEG in the early period but accelerated the process in the late period; the addition of nano-Ni made the PEG degradation process begin as soon as melted. The in-situ FTIR results showed that nano-Ni promoted the thermooxidative degradation of PEG in air, and made the degradation process of PEG complete much earlier.

Restricted access

The common wheat line, YW243, developed in our research group, was tested for the resistances of barley yellow dwarf virus (BYDV), powdery mildew (Pm) and stripe rust in field, and was analyzed by molecular markers for convenient trace of the resistant genes in breeding. Genomic in situ hybridization (GISH) analysis and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) assay further demonstrated that YW243 was a homozygous multiple translocation line of Triticum aestivum, Thinopyrum intermedium and Secale cereale (T7DS·7DL-7XL & 1BL·1RS). The disease resistance test and marker analysis showed that YW243 carried seven resistance genes to the three diseases, including Bdv2 to BYDV on 7DL-7XL, Pm4 to powdery mildew on 2AL, Yr2, Yr9, Sr 31 and Lr26 and a new Yr to stripe rust on 7B, 1BL, 1RS and 2BL. Restriction fragment length polymorphism (RFLP) markers Xpsr687 and Xwg380 , sequence tagged site (STS) marker STS 1700 , simple sequence repeat (SSR) markers Xgwmc364 and Xgwm582 , SSR markers Xgwm388 and Xgwm501 can be used as diagnostic tools to track Bdv2, Pm4, Yr2, Yr9 and Yr in YW243 , respectively; and two amplified fragment length polymorphism (AFLP) markers M54E63 - 700 and M54E64 - 699 can also be used to select Yr in YW243 .

Restricted access

Abstract  

The uranium(VI) accumulation was studied in detail by using the biomass of mangrove endophytic fungus Fusarium sp.#ZZF51 from the South China Sea. The uranium(VI) biosorption process onto the tested fungus powders was optimized at pH 4.0, adsorption time 60 min, and uranium(VI) initial concentration 50 mg L−1 with 61.89% of removal efficiency. According to Fourier transform infrared spectra for the tested fungus before and after loaded with uranium(VI), the results showed that both of hydroxyl and carboxyl groups acted as the important roles in the adsorption process. In addition, the experimental data were analyzed by using parameter and kinetic models, and it was obtained that the Langmuir isotherm model and the pseudo-second-order kinetic model provided better correlation with the experimental data for adsorption of uranium(VI).

Open access

Abstract  

The non-isothermal decomposition kinetics of 4Na2SO4·2H2O2·NaCl have been investigated by simultaneous TG-DSC in nitrogen atmosphere and in air. The decomposition processes undergo a single step reaction. The multivariate nonlinear regression technique is used to distinguish kinetic model of 4Na2SO4·2H2O2·NaCl. Results indicate that the reaction type Cn can well describe the decomposition process, the decomposition mechanism is n-dimensional autocatalysis. The kinetic parameters, n, A and E are obtained via multivariate nonlinear regression. The n th-order with autocatalysis model is used to simulate the thermal decomposition of 4Na2SO4·2H2O2·NaCl under isothermal conditions at various temperatures. The flow rate of gas has little effect on the decomposition of 4Na2SO4·2H2O2·NaCl.

Restricted access

Abstract  

DTPA-Octreotide(Pentetreotide), a somatostatin analogue which can bind specifically and with high affinity to somatostatin receptor in vitro and vivo, labeled with99mTc by tin reduction in acetate buffer, has been characterized by Reverse-phase High performance Liquid Chromatography. The effect of different solvents, mobile phase pH, linear gradient and the injected volume on the separation efficiency was evaluated. The results show that the separation efficiency is best using μBondapak-C18 (300×3.9 mm2), linear gradient of 40% to 80% methanol (1.0 ml/min) in 0.05M acetate buffer (pH 5.5) over a 30 min period and maintaining for another 10 min. The labeled product is a mixture which mainly consists of five components (a, b, c, d, e) successfully proved by HPLC. Paper chromatography is also evaluated in this paper. It may be used to determine the radiochemical purity of the labeling product, but is not a good choice for the verification each components.

Restricted access

The use of polypropylene materials in industry for food packaging is increasing. The presence of additives in the polymer matrix enables the modification or improvement of the properties and performance of the polymer, but these additives are potential risk for human health. In this context, an efficient analytical method for the quantitative determination of three antioxidants (2,6-di-tert-butyl-4-methylphenol (BHT), dibutylhydroxyphenylpropionic acid stearyl ester (Irganox 1076), and tns-(2.4-di-tert-butyl)-phosphite (Irgafos 168)) and five ultraviolet stabilizers (2-(2′-hydroxy-5′-methylphenyl) (UV-P), (2′-hydroxy-3′-tert-5′-methylphenyl)-5-chloroben zotriazole (UV-326), 2-(2′-hydroxy-3′,5′-di-tert-butylphenyl)-5-chlorobenzotriazole (UV-327), 2-(2H-benzotriazol- 2-yl)-4-(1,1,3,3-tetramethylbutyl)phenol(UV-329), and 2-hydroxy-4(octyloxy) benzophenone (UV-531)) in polypropylene food packaging and food simulants by high-performance liquid chromatography (HPLC) has been developed. Parameters affecting the efficiency in the process such as extraction and chromatographic condition were studied in order to determine operating conditions. The analytical method showed good linearity, presenting correlation coefficients (R ≥ 0.9977) for all additives. The limits of detection and quantification were between 0.03 and 0.30 μg mL−1 and between 0.10 and 1.00 μg mL−1 for eight analytes, respectively. Average spiked recoveries in blank polypropylene packaging and food simulants were in the range of 80.4–99.5% and 75.2–106.7%, with relative standard deviations in the range of 0.9–9.1% and 0.2–9.8%. Dissolving the polypropylene food packaging with toluene and precipitating by methanol was demonstrated more effective than ultrasonic extract with acetonitrile or dichloromethane for extracting the additives. The method was successfully applied to commercial polypropylene packaging determination, Irgafos 168 and UV-P were frequently found in six commercial polypropylene films, and the content ranged from 166.47 ± 5.11 to 845.27 ± 29.31 μg g−1 and 2.10 ± 0.29 to 19.23 ± 1.26 μg g−1, respectively.

Open access

Rice sheath blight, caused by Rhizoctonia solani, is the most serious disease in the southern rice producing regions of China. The use of resistant varieties is the most economic strategy to control the disease. In this paper, a seedling inoculation method was used to evaluate rice germplasm resources for resistance to sheath blight. A total of 363 rice varieties were evaluated with a set of R. solani isolates. The results indicated that the rice varieties generally lacked resistance to R. solani, and no highly resistant/immune (HR) variety was found. However, two varieties displayed clear resistance (R) and 37 showed moderate resistance (MR) to the fungus. Overall, hybrid rice varieties have better resistance than conventional rice varieties, and among hybrid rice varieties, those with the II-32A sterile line genetic background were the most resistant. The results also indicated significant interactions between rice varieties and pathogen isolates, suggesting that an understanding of local R. solani populations is needed when recommending varieties to local growers.

Restricted access