Authors:Yu. Trach, V. Sydorchuk, O. Makota, S. Khalameida, R. Leboda, J. Skubiszewska-Zięba, and V. Zazhigalov
not detected by means of used methods of investigations. The increase of specific surface area of milled samples (C3, C4) confirms the latter suggestion.
It is well known that the results
Authors:V. Sydorchuk, O. Makota, S. Khalameida, L. Bulgakova, J. Skubiszewska-Zięba, R. Leboda, and V. Zazhigalov
More detailed information about structure of deposited phases was obtained with the help UV–Visspectroscopy that get a deeper insight on the state of the vanadia and molybdena at support surface [ 19 ]. It is known that UV–Vis absorption
Authors:P. S. Epaminondas, K. L. G. V. Araújo, J. A. Nascimento, M. C. D. Silva, R. Rosenhaim, L. E. B. Soledade, N. Queiroz, A. L. Souza, I. M. G. Santos, and A. G. Souza
function of the overall peak area.
The physico-chemical properties were measured according to the methods described by AOCS [ 8 ]. The oil samples were also characterized by UV–Visspectroscopy using a Shimadzu UV-2550 spectrophotometer at the 200
Authors:J. Maul, A. S. Brito, A. L. M. de Oliveira, S. J. G. Lima, M. A. M. A. Maurera, D. Keyson, A. G. Souza, and I. M. G. Santos
to form Cu 2 O at around 1039–1043 °C. Wang et al. [ 8 ] reported the same synthesis using copper acetate in ethanolic solution with NaOH and showed by using UV–Visspectroscopy that absorption peak of CuO is located at about 340 nm and no presenting
Authors:Mohammad Saleh Ghodrati, Mohammad Haghighi, Jafar Sadegh Soltan Mohamdzadeh, Behzad Pourabas, and Ehsan Pipelzadeh
media at 25 °C. Samples were taken at 15 min intervals from the reaction media and filtered using a 0.45 μm filter to form a clear solution. Further investigation of photocatalytic performance was conducted using a Philips UV–visspectroscopy, indicating
Authors:F. T. G. Vieira, A. L. M. Oliveira, D. S. Melo, S. J. G. Lima, E. Longo, A. S. Maia, A. G. Souza, and I. M. G. Santos
are difficult to eliminate after formation. Elimination of the organic material was evaluated by thermal analysis (TG/DTA) and infrared spectroscopy. X-ray diffraction was used to evaluate the crystallization, while UV–visspectroscopy permitted to
Authors:Mojtaba Nasr-Esfahani and Abolghasem Nourmohammadi
radiation wavelength, k = 0.90 and 2θ is the Bragg angle [ 14 ]. UV–Visspectroscopy was also utilized to measure the optical transmittance of the produced films using a Varian Cary 500 Scan spectrophotometer.
To evaluate the catalytic activity
Authors:D. Melo, R. M. M. Marinho, F. T. G. Vieira, S. J. G. Lima, E. Longo, A. G. Souza, A. S. Maia, and I. M. G. Santos
and could be confirmed by UVvisspectroscopy that showed higher amounts of Cu(I) for samples with higher copper amount and higher heat treatment temperatures.
The authors acknowledge Coordination of Improvement of Higher
Authors:Bhupendra Singh Rathore, Mulayam Singh Gaur, and Kripa Shanker Singh
characterized by UV–visspectroscopy, scanning electron microscopy (SEM), energy dispersive X-ray spectra (EDX), differential scanning calorimetry (DSC), and thermally stimulated discharge current (TSDC) measurement.