Search Results
Abstract
Ethylene copolymers exhibit a broad range of comonomer distributions. Thermal fractionation was performed on different grades of copolymers in a differential scanning calorimeter (DSC). Subsequent melting scans of fractionated polyethylenes provided a series of endothermic peaks each corresponding to a particular branch density. The DSC melting peak temperature and the area under each fraction were used to determine the branch density for each melting peak in the thermal fractionated polyethylenes. High-density polyethylene (HDPE) showed no branches whereas linear low-density polyethylenes (LLDPE) exhibited a broad range of comonomer distributions. The distributions depended on the catalyst and comonomer type and whether the polymerisation was performed in the liquid or gas phase. The DSC curves contrast the very broad range of branching in Ziegler—Natta polymers, particularly those formed in the liquid phase, with those formed by single-site catalysts. The metallocene or single-site catalysed polymers showed, as expected, a narrower distribution of branching, but broader than sometimes described. The ultra low-density polyethylenes (ULDPE) can be regarded as partially melted at room temperature thus fractionation of ULDPE should continue to sub-ambient temperatures. The thermal fractionation is shown to be useful for determining the crystallisation behaviour of polyethylene blends.
In thermal analysis polyethylenes can be characterized by their melting temperature. With the polyethylene mixtures studied, we obtained the best results during solidification. Crystallization temperature decreased in the order: high density PE, low density PE linear, radical low density PE.
Abstract
In this study, the stepwise isothermal crystallization or thermal fractionation of Ziegler—Natta and metallocene based polyethylenes (ZN-PE and m-PE) with two kinds of branch lengths (ethyl and hexyl) and branch compositions were studied using simultaneous synchrotron small-angle X-ray scattering (SAXS)/wide-angle X-ray diffraction (WAXD) and differential scanning calorimetry (DSC). The crystal long period and the invariant were determined by SAXS, and the variations of crystal unit cell parameters and the degree of crystallinity were determined by WAXD. The arithmetic mean length (Ln), the weightedmean length (Lw) and the broadness index (Lw/Ln) of the studied polyethylenes were previously determined by DSC. Results from these studies were interpreted using the model of branch exclusion, which affects the ability of the chain-reentry into the crystal phase. Multiple SAXS peaks and step-change in crystallinity change (WAXD) were seen during heating, which corresponded well with the crystal thickness distribution induced by stepwise crystallization. The effects of the heterogeneity of the 1-olefin branch length and the distribution on the crystal long period and the invariant as well as the degree of crystallinity were discussed.
Abstract
The oxidation of pure and recycled polyethylene samples was studied by thermal analysis (DTA-TG-DSC): presence of two exothermic peaks and mass loss. The thermo-oxidation products, containing C-O and C=O links, were identified by IR spectrometry and GC-MS spectrometry. The oxidation is easier from low to high density polyethylene.
polyethylene [ 17 – 27 ]. Chlorosulphonated polyethylene (CSM) is a specialty elastomer, produced by modification and functionalization of polyethylene (PE) performed during simultaneous actions of chlorine and sulphur dioxide on PE (usually PE
storage conditions of light (presence; absence) and relative humidity (50%; 75%) at 23 °C on the water content and colour of P. cruentum microalga; ii) to test and make a comparison between two packaging materials, low-density polyethylene (PE-LD) and
Polyethylene oxides
Analysis of tablet formation and properties of the resulting tablets
Abstract
The aim of this study was to study tablet formation of polyethylene oxides (PEOs) with different molecular masses by means of 3D modeling and comparing the results to those of other more traditional techniques, such as Heckel analysis, analysis by the pressure- time function and energy analysis. The molecular masses ranged between 400,000 and 7,000,000 Da. Material properties, such as water content, particle size and morphology, and glass transition temperature were also studied. To complete this study, elastic recovery dependent on maximum relative density and time were determined. Furthermore, the crushing force of the tablets and their morphology were analyzed. The PEOs consist of smooth edged particles of irregular shape; the particle size is similar to one type of MCC, namely Avicel PH 200. The PEOs are much more ductile during compression than MCC. Elastic recovery after tableting is higher than that for tablets made from MCC and continues for some time after tableting. The crushing force of the resulting tablets is low. In conclusion, with regards to direct compression the PEOs do not appear to be useful as sole tableting excipients.
incompatible contaminations; in particular polyolefines diminish the mechanical properties. The polyethylene as a polymer of low glass-transition temperature should be a good impact modifier of PVC but the incompatibility makes its application seemingly
, 13 , 14 ], avoiding the drawbacks (embrittlement, loss of transparency and loss of lightness) usually associated to the addition of traditional microfillers [ 15 , 16 ]. High-density polyethylene (HDPE) is one of the most widely used
. Plant-Environment Interactions 2000 McClendon, J.H. 1981. The osmotic pressure of concentrated solutions of polyethylene
