Authors:Péter Bajcsi, Tamás Bozsó, Róbert Bozsó, Gábor Molnár, Viktor Tábor, Imre Czinkota, Tivadar M. Tóth, Balázs Kovács, Félix Schubert, Gábor Bozsó, and János Szanyi
Our research team has developed a new well completion and rework technology involving lasers. The system is made up of a high-power laser generator and a custom-designed directional laser drilling head. The laser head is attached to a coiled tubing unit to maximize production and to carry out special downhole tasks. In this phase of the development effort, laser technology is particularly well suited to cost-efficiently drill short laterals from existing wells in a single work phase, drilling through the casing and cement as well as the formation. The technology, which is an extended perforation solution, enables a more intensive interaction with the downhole environment and supports cutting edge subsurface engineering scenarios such as barite removal. Laser-induced heat treatment appears to be a suitable alternative to effectively remove the almost immovable deposits and scales from thermal water-well pipes.
Authors:Imre Czinkota, János Szanyi, Balázs Kovács, András Sebők, Ildikó Hajdok, and Márton Papp
This paper aims at determining the behavior of thermal water brought to surface and how this might impact reinjection wells and the rock during reinjection. The biggest problem is that reinjection wells are predisposed to choking. We searched for a method to examine this process, including a model for physico-chemical changes in the water—rock interaction. Two different samples of powdered rock (designated α and β) were analyzed using thermal water samples from production and reinjection wells. The pH shows significant differences between the samples from wells where free water treatment was carried out, and those from the aerated thermal waters, as well as for the rock sample. Basically, a decrease in sediment volume can be obtained by increasing the pH. The salt effect was more coherent. Its result was an interesting case of W-shaped graphs from the producing well. On the other hand there is virtually no difference between the samples with acid titration.
The article offers a general overview of risk assessment in the environmental and Earth sciences. To begin with natural and man-made hazards are discussed, followed by general definitions and the treatment of uncertainty and risk. The main steps of risk assessment in the Earth sciences are discussed step by step. Finally, the problems of decision-making are briefly treated. To assist the interested reader a comprehensive list of essential references is also presented.
This paper presents a status review of the fossil remains discovered in European Russia and assigned to Stephanorhinus kirchbergensis (Jäger, 1839). Similarly to other areas, this taxon appears rare in European Russia, despite its wide distribution. Furthermore, a large part of the S. kirchbergensis material reported in literature is presently untraceable in the Russian museum collections. In fact, from a total of twenty-one sites, the material is physically available from only three of them. In addition, the remains from Podosinik, previously not mentioned in literature, are reported here. The available material has been studied using descriptive morphological characters. This study follows a previous treatment of the related sites and material from Siberian Russia by the same author. Stephanorhinus is considered here as a synonym of Dicerorhinus.
A field experiment with microelement loads was set up on loamy-textured, calcareous chernozem soil formed on loess. The ploughed layer contained about 5% CaCO3 and 3% humus. The soil was well supplied with Ca, Mg, Mn and Cu, moderately supplied with N and K, and weakly supplied with P and Zn. The water table is at the depth of 15 m, the water-balance of the area is negative, and the site is drought-sensitive. Salts of the 13 examined microelements were applied at 4 levels in the spring of 1991.Treatments were arranged in split-plot design, in a total of 104 plots with two replications. Loading rates were 0, 90, 270 and 810 kg/ha per elements in the form of AlCl3, NaAsO2, BaCl2, CdSO4, K2CrO4, CuSO4, HgCl2, (NH4)6Mo7O24, NiSO4, Pb(NO3)2, Na2SeO3, SrSO4, and ZnSO4. Soil profiles of the control and the 810 kg/ha treatment were sampled in the 3rd, 6th and 10th year of the trial. The mixed samples, consisting of 5 cores/plot, were taken every 30 cm to the depth of 60 (1993), 90 (1996) and 290 (2000) cm. NH4-acetate + EDTA-soluble element content was determined. The scheme for vertical movement of soluble elements in soil profile as a function of time is shown in Fig. 1. The main conclusions of the study can be drawn as follows:
On contaminated soil with 810 kg/ha loading rates, As, Hg, Ni, Cu, Pb, Ba and Sr displayed no significant vertical movement. The movement of these elements is blocked in the soil-plant system: their accumulation in the above-ground plant parts usually remains below 5–10 mg/kg D.M., with the exception of Ba and Sr which showed a somewhat higher accumulation. On this soil the above elements do not seem to be dangerous contaminants either to soil, groundwater or plants. Extreme As and Hg loads, however, resulted in phytotoxicity in some plants.
Moderate extent of leaching occurs in the case of Zn and Cd, when they are enriched significantly. Their accumulation was moderate in the above-ground plant parts. Zn is not a dangerous pollutant either for soil, plants or groundwater at this site. Cd, however, is a very dangerous element from the human toxicological point of view and more extreme Cd loads also proved to be toxic for soil life, crops yield and quality.
Cr, Se, and Mo (in the form of chromate, selenate and molybdenate anions) exhibited great mobility in the soil and partly in the soil-plant system. Cr was hardly detectable in the above-ground floral parts. Its rapid leaching, however, can jeopardize groundwater quality. Se showed hyperaccumulation in all plant organs with high toxicity for all kind of crops. Mo also showed two or three orders of magnitude greater accumulation in plant parts, resulting in products unfit for animal or human consumption. Under our experimental conditions Cr(VI), Se, Mo can be classified as dangerous contaminants, since the anion forms remained stabile for a long time in this well-aerated calcareous environment.
Authors:Ivett Kovács, Tibor Németh, Gabriella B. Kiss, and Zsolt Benkó
and styles of mineralization: variations and their causes, and guidelines for exploration . Journal of Geochemical Exploration , 36 : 445 – 474 . 10.1016/0375-6742(90)90063-G Yamada , H. and Nakazawa , H. ( 1993 ). Isothermal treatments of
Authors:Dorottya Kovács, Gergely Dabi, and Balázs Vásárhelyi
misidentified image segments following the segmentation treatment. These objects are mainly fluorescent mineral grains of nearly isometric shape. Due to the obvious difference of the shape of fractures and that of the nonlinear objects, these groups of pixels