European Commission Joint Research Centre, Institute for Reference Materials and Measurements Retieseweg B-2440 Geel Belgium
EC-European Commission, JRC-Joint Research Centre Retieseweg European Commission, Joint Research Centre, Institute for Reference Materials and Measurements (IRMM), Technical Responslibe Neutron Activation Analysis B-2440 Geel Belgium
A series of reference materials intended for use as activation or fission monitors for neutron fluence rate measurements has been prepared by the Joint Research Centre of the European Commission. Certification has been carried out by expert European laboratories and distribution of the certified reference materials (CRMs) is through the BCR programme of the Commission. The list (18 CRMs) includes materials to cover the complete energy spectrum, and suitable for different irradiation times. Fission monitors are 238UO2 or 237NpO2 in the form of microspheres. Activation monitors are high purity metals (Ni, Cu, Al, Fe, Nb, Rh, or Ti), certified for interfering trace impurities, or dilute aluminium-based alloys, where aluminium is chosen as a suitable matrix for reducing the neutron self-shielding effect. Newly certified materials are IRMM-530R Al-0.1%Au, replacing the exhausted IRMM-530 material, used as comparator for k0-standardization, and three new Al-Co alloys (0.01-1%Co). Two others, in the process of certification are Al-0.1%Ag and Al-2%Sc for thermal and epithermal fluence rate measurements. Other candidate reference materials currently being certified are two uranium-doped glass intended for dosimetry by the fission-track technique.