PET with 68Ga from the TiO2- or SnO2- based 68Ge/68Ga generators is of increasing interest for PET imaging in nuclear medicine. In general, radionuclidic purity (68Ge vs. 68Ga activity) of the eluate of these generators varies between 0.01 and 0.001%. Liquid waste containing low amounts of 68Ge activity is produced by eluting the 68Ge/68Ga generators and residues from PET chemistry. Since clearance level of 68Ge activity in waste may not exceed 10 Bq/g, as stated by European Directive 96/29/EURATOM, our purpose was to reduce 68Ge activity in solution from >10 kBq/g to <10 Bq/g; which implies the solution can be discarded as regular waste. Most efficient
method to reduce the 68Ge activity is by sorption of TiO2 or Fe2O3 and subsequent centrifugation. The required 10 Bq per mL level of 68Ge activity in waste was reached by Fe2O3 logarithmically, whereas with TiO2 asymptotically. The procedure with Fe2O3 eliminates ≥90% of the 68Ge activity per treatment. Eventually, to simplify the processing a recirculation system was used to investigate 68Ge activity sorption on TiO2, Fe2O3 or Zeolite. Zeolite was introduced for its high sorption at low pH, therefore 68Ge activity containing waste could directly be used without further interventions. 68Ge activity containing liquid waste at different HCl concentrations (0.05–1.0 M HCl), was recirculated at 1 mL/min. With Zeolite
in the recirculation system, 68Ge activity showed highest sorption.