The aim of this research is the analysis of the effect of the modification of the base profile angles of x-zero gear drives for the TCA parameters. We analyze the normal stress, the normal deformation and the normal elastic strain on the connecting zone of the gear pairs. Based on the received results we create diagrams which show the fluctuation of the analyzed TCA parameters in the function of the changing of the selected parameter of the x-zero gear drives. After the analysis we determine the consequences and select the appropriate variant.
Bodzás S. (2017), Computer aided designing and modelling of x-zero gear drive. International Review of Applied Sciences and Engineering, 8 (1), 93–97. DOI: 10.1556/1848.2017.8.1.13
Bodzás S. (2019), Computer aided designing and modelling of spur gear pairs having normal and modified straight teeth. International Review of Applied Sciences and Engineering, 10 (2), 157–163. DOI: 10.1556/1848.2019.0019
Dudás I. (2011), Gépgyártástechnológia III., A. Megmunkáló eljárások és szerszámaik, B. Fogazott alkatrészek gyártása és szerszámaik. Műszaki Kiadó, Budapest
Dudás L. (1991), Kapcsolódó felületpárok gyártásgeometriai feladatainak megoldása az elérés modell alapján. Kandidátusi értekezés, Budapest, TMB, p. 144, 2005. 06. 29.
Dudley D. W. (1962), Gear Handbook. McGraw Hill Book Co., New York-Toronto-London
Erney Gy . (1983), Fogaskerekek. Műszaki Könyvkiadó, Budapest, p. 460.
Fuentes A. , Ruiz-Orzaez R., Gonzalez-Perez I. (2014), Computerized design, simulation of meshing, and finite element analysis of two types of geometry of curvilinear cylindrical gears. Computer Methods Apply Mechanical Engineering, Elsevier, pp. 321–339.
Gonzalez-Perez I. , Roda-Casanova V., Fuentes A. (2015), Modified geometry of spur gear drives of compensation of shaft deflections. Meccanica, 1855-1867, DOI: 10.1007/s11012-015-0129-9
Litvin F. L. , Fuentes A. (2004), Gear Geometry and Applied Theory. Cambridge University Press, ISBN 978 0 521 81517 8
Litvin F. L. (1972), A fogaskerékkapcsolás elmélete. Műszaki Könyvkiadó, Budapest
Pálinkás S. , Krállics Gy., Bézi Z. (2013), Modelling of Crown and Cold Rolled Aluminum Sheet. Materials Science Fórum, pp. 115–124.
Rohonyi V. (1980), Fogaskerékhajtások. Műszaki Könyvkiadó, Budapest
Terplán Z. (1975), Gépelemek IV. Kézirat, Tankönyvkiadó, Budapest, p. 220.
Páczelt I. , Szabó T., Baksa A. (2004), A végeselem módszer alapjai. Miskolci Egyetem, p. 243.
Mankovits T. , Szabó T., Kocsis I., Páczelt I. (2014), Optimization of the shape of axi–symmetric rubber bumpers. Strojniski Vestnik – Journal of Mechanical Engineering, 61–71.