In different Comfort Standards, for different building functions the requirements for summer and also for winter period differ. The operative temperature is one of these parameters, which in different Comfort Standards for summer-winter period specifies the building's comfort category.
This paper presents the results of measurement of the operative temperature in PASSOL laboratory with different heat storage and using night ventilation.
Arif M. , Katafygiotou M., Mazroei A., Kaushik A., Elsarrag E. (2016), Impact of indoor environmental quality on occupant well-being and comfort: A review of the literature. International Journal of Sustainable Built Environment, 5 (1), 1–11.
Kalmár F. (2016), Interrelation between glazing and summer operative temperature in buildings. Int. Rev. Appl. Sci. Eng., 7 (1), 51–60.
Ministry of National Development : National Energy Strategy
European Parliament and its Council 2010/31/EU Directive, 2010.
Maragogiannis K. , Dionysia K., Efpraxia-Aithra M. (2011), Study of night ventilation efficiency in urban environment: technical and legal aspects. Scientific Journal of Riga Technical University. Environmental and Climate Technologies, 6 (1), 49–56.
Omrani S. (2018), Natural ventilation in high-rise apartments in hot-humid climates. Diss. Queensland University of Technology.
https://www.buildinggreen.com/feature/expanding-engineers-comfort-zone-working-adaptive-thermal-comfort. (Downloaded: 11.10.2018).
Yang L. , Li Y. (2008), Cooling load reduction by using thermal mass and night ventilation. Energy and Buildings, 40 (11), 2052–2058.
https://knowledge.autodesk.com/search-result/caas/simplecontent/content/night-purge-ventilation.html. (Downloaded: 11.11.2018)
Kolokotroni M. , Webb B. C., Hayes S. D. (1998), Summer cooling with night ventilation for office buildings in moderate climates. Energy and Buildings, 27 (3), 231–237.
Artmann N. (2009), Cooling of the building structure by night-time ventilation. Diss. Department of Civil Engineering, Aalborg University.
https://www.eawag.ch/fileadmin/_processed_/csm_27_8c8a406f8jpg (Downloaded: 11.11.2018)
Zhivov A. , Skistad H., Mundt E., Posokhin V., Ratcliff M., Shilkrot E., Strongin A. (2001), Principles of air and contaminant movement inside and around buildings. In: Industrial Ventilation Design Guidebook. Academic Press, pp. 415–599.
Csáky I. , Kalmár F. (2012), Simulation of the internal temperature in the PASSOL Laboratory, University of Debrecen. Int. Rev. Appl. Sci. Eng., 1 (3), 63–73.
Csáky I. , Kalmár F. (2015), Effects of thermal mass, ventilation and glazing orientation on indoor air temperature in buildings. Journal of Building Physics, 39 (2), 189–204.
Measurement data monitoring with testo Saveris Professional Edition, Instruction manual
ISO 7730-2005 : Ergonomics of the thermal environment-Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria.
EN 15251:2007 : Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics.
EN ISO 13790:2008 (2008) Energy performance of buildings – Calculation of energy use for space heating and cooling.