View More View Less
  • 1 Institute for Mechanical Engineering Technology, PhD School of Mechanical Engineering, Szent István University, H-2100 Gödöllő, Páter Károly utca 1, Hungary
  • | 2 Research Centre for Natural Sciences, HAS, Magyar tudósok krt. 2, Budapest, Hungary
Open access

Polytetrafluoroethylene surface was treated by atmospheric DBD plasma for 1 min in ambient conditions. The effect of DBD plasma introduces signifi cant increasing of the surface energy (wettability) within 24 hours after treatment. However, the surface starts recovering to the original state with ageing. The surface elemental composition shows enhancing in oxygen content which suggests presenting the polar functional groups. The surface roughness exhibits a mild reduction within 24 hours after treatment. Whereas, the roughness values start to increase with the function of time.

  • [1]

    McKeen L. W. (2015), Fluorinated coatings and finishes handbook: The definitive user’s guide. 2nd edition, Oxford: William Andrew. ISBN: 978-0-8155-1522-7

    • Search Google Scholar
    • Export Citation
  • [2]

    Mona M. , Occhiello E., Garbassi F. (1990), Surface characterization of plasma-treated PTFE. Surface and Interface Analysis, 16, 412417. DOI: 10.1002/sia.740160186.

    • Search Google Scholar
    • Export Citation
  • [3]

    Tan K. L. , Woon L. L., Wong H. K., Kang E. T., Neoh K. G. (1993), Surface modification of plasma- pretreated poly(tetrafluoroethylene) films by graft copolymerization. Macromolecules, 26, 28322836. DOI: 10.1021/ma00063 a030

    • Search Google Scholar
    • Export Citation
  • [4]

    Wilson D. J. , Williams R. L., Pond R. C. (2001), Plasma modification of PTFE surfaces. Part I: Surfaces immediately following plasma treatment. Surface and Interface Analysis, 31, 385396. DOI: 10.1002/sia.1065.

    • Search Google Scholar
    • Export Citation
  • [5]

    Liu C. Z. , Wu J. Q., Ren L. Q., Tong J., Li J. Q., Cui N., Brown N. M. D., Meenan B. J. (2004), Comparative study on the effect of RF and DBD plasma treatment on PTFE surface modification. Materials Chemistry and Physics, 85, 340346. DOI: 10.1016/j.matchemphys.2004.01.026.

    • Search Google Scholar
    • Export Citation
  • [6]

    Chena W. , Jie-ronga C., Ru L. (2008), Studies on surface modification of poly(tetrafluoroethylene) film by remote and direct Ar plasma. Applied Surface Science, 254, 28822888. DOI: 10.1016/j.apsusc.2007.10.029

    • Search Google Scholar
    • Export Citation
  • [7]

    Kereszturi K. , Tóth A., Mohai M., Bertóti I., Szépvölgyi J. (2010), Nitrogen plasma-based ion implantation of poly(tetrafluoroethylene). Applied Surface Science, 256, 63856389. DOI: 10.1016/j.apsusc.2010.04.021

    • Search Google Scholar
    • Export Citation
  • [8]

    Hunke H. , Soin N., Shah T., Kramer E., Witan K., Siores E. (2015), Influence of plasma pre-treatment of polytetrafluoroethylene (PTFE) micropowders on the mechanical and tribological performance of Polyethersulfone (PESU)–PTFE composites. Wear, 328, 480487. DOI: 10.1016/j.wear.2015.03.004

    • Search Google Scholar
    • Export Citation
  • [9]

    Zhang H. J. , Zhang Z. Z., Guo F., Liu W. M. (2009), The influence of plasma treatment on the tribological properties of hybrid PTFE/cotton fabric/phenolic composites. Polymer Composites, 30, 15231531. DOI: 10.1002/ pc.20725

    • Search Google Scholar
    • Export Citation
  • [10]

    Šimor M. , Ráhel’ J., Vojtek P., Černák M., Brablec A. (2002), Atmospheric-pressure diffuse coplanar surface discharge for surface treatments. Applied Physics Letters, 81, 27162718. DOI: 10.1063/1.1513185

    • Search Google Scholar
    • Export Citation
  • [11]

    Černák M. , Černáková L., Hudec I., Kováčik D., Zaho ranová A. (2009), Diffuse coplanar surface barrier discharge and its applications for in-line processing of low-added-value materials. European Physical Journal, Applied Physics, 47, 22806. DOI: 10.1051/epjap/2009131

    • Search Google Scholar
    • Export Citation
  • [12]

    Kostov K. G. , Hamia Y. A. A., Mota R. P., dos Santos A. I. R., Nascente P. A. P. (2014), Treatment of polycarbonate by dielectric barrier discharge (DBD) at atmospheric pressure. Journal of Physics: Conference Series, 511, 12075.

    • Search Google Scholar
    • Export Citation
  • [13]

    Mohai M. (2004), XPS MultiQuant: Multimodel XPS quantification software. Surface and Interface Analysis, 36, 828832. DOI: 10.1002/sia.1775

    • Search Google Scholar
    • Export Citation
  • [14]

    Evans S. , Pritchard R. G., Thomas J. M. (1978), Relative differential subshell photoionization cross-sections (MG Kα) from lithium to uranium. Journal of Electron Spectroscopy and Related Phenomena, 14, 341358. DOI: 10.1016/0368-2048(78)80008-5

    • Search Google Scholar
    • Export Citation
  • [15]

    Reilman R. F. , Msezane A., Manson S. T. (1976), Relative intensities in photoelectron spectroscopy of atoms and molecules. Journal of Electron Spectroscopy and Related Phenomena, 8, 389394. DOI: 10.1016/0368- 2048(76)80025-4

    • Search Google Scholar
    • Export Citation
  • [16]

    Al-Maliki H. , Kalácska G. (2017), Friction behavior of engineering polymers treated by atmospheric DBD plasma. Periodica Polytechnica Mechanical Engineering, 61, 303308. DOI: 10.3311/PPme.11249.

    • Search Google Scholar
    • Export Citation
  • [17]

    De Groot P. (2011), Coherence Scanning Interferometry. In: Optical Measurement of Surface Topography, Springer, Berlin, pp. 187208.

The author instruction is available in PDF.
Please, download the file from HERE.
Submit Your Manuscript
 

Senior editors

Editor-in-Chief: Ákos, Lakatos

Founder, former Editor-in-Chief (2011-2020): Ferenc Kalmár

Founding Editor: György Csomós

Associate Editor: Derek Clements Croome

Associate Editor: Dezső Beke

Editorial Board

  • M. N. Ahmad, Institute of Visual Informatics, Universiti Kebangsaan Malaysia, Malaysia
  • M. Bakirov, Center for Materials and Lifetime Management Ltd., Moscow, Russia
  • N. Balc, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
  • U. Berardi, Ryerson University, Toronto, Canada
  • I. Bodnár, University of Debrecen, Debrecen, Hungary
  • S. Bodzás, University of Debrecen, Debrecen, Hungary
  • F. Botsali, Selçuk University, Konya, Turkey
  • S. Brunner, Empa - Swiss Federal Laboratories for Materials Science and Technology
  • I. Budai, University of Debrecen, Debrecen, Hungary
  • C. Bungau, University of Oradea, Oradea, Romania
  • M. De Carli, University of Padua, Padua, Italy
  • R. Cerny, Czech Technical University in Prague, Czech Republic
  • Gy. Csomós, University of Debrecen, Debrecen, Hungary
  • T. Csoknyai, Budapest University of Technology and Economics, Budapest, Hungary
  • G. Eugen, University of Oradea, Oradea, Romania
  • J. Finta, University of Pécs, Pécs, Hungary
  • A. Gacsadi, University of Oradea, Oradea, Romania
  • E. A. Grulke, University of Kentucky, Lexington, United States
  • J. Grum, University of Ljubljana, Ljubljana, Slovenia
  • G. Husi, University of Debrecen, Debrecen, Hungary
  • G. A. Husseini, American University of Sharjah, Sharjah, United Arab Emirates
  • N. Ivanov, Peter the Great St.Petersburg Polytechnic University, St. Petersburg, Russia
  • A. Járai, Eötvös Loránd University, Budapest, Hungary
  • G. Jóhannesson, The National Energy Authority of Iceland, Reykjavik, Iceland
  • L. Kajtár, Budapest University of Technology and Economics, Budapest, Hungary
  • F. Kalmár, University of Debrecen, Debrecen, Hungary
  • T. Kalmár, University of Debrecen, Debrecen, Hungary
  • M. Kalousek, Brno University of Technology, Brno, Czech Republik
  • J. Koci, Czech Technical University in Prague, Prague, Czech Republic
  • V. Koci, Czech Technical University in Prague, Prague, Czech Republic
  • I. Kocsis, University of Debrecen, Debrecen, Hungary
  • I. Kovács, University of Debrecen, Debrecen, Hungary
  • É. Lovra, Univesity of Debrecen, Debrecen, Hungary
  • T. Mankovits, University of Debrecen, Debrecen, Hungary
  • I. Medved, Slovak Technical University in Bratislava, Bratislava, Slovakia
  • L. Moga, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
  • M. Molinari, Royal Institute of Technology, Stockholm, Sweden
  • H. Moravcikova, Slovak Academy of Sciences, Bratislava, Slovakia
  • P. Mukhophadyaya, University of Victoria, Victoria, Canada
  • H. S. Najm, Rutgers University, New Brunswick, United States
  • J. Nyers, Subotica Tech - College of Applied Sciences, Subotica, Serbia
  • B. W. Olesen, Technical University of Denmark, Lyngby, Denmark
  • S. Oniga, North University of Baia Mare, Baia Mare, Romania
  • J. N. Pires, Universidade de Coimbra, Coimbra, Portugal
  • L. Pokorádi, Óbuda University, Budapest, Hungary
  • A. Puhl, University of Debrecen, Debrecen, Hungary
  • R. Rabenseifer, Slovak University of Technology in Bratislava, Bratislava, Slovak Republik
  • M. Salah, Hashemite University, Zarqua, Jordan
  • D. Schmidt, Fraunhofer Institute for Wind Energy and Energy System Technology IWES, Kassel, Germany
  • L. Szabó, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
  • Cs. Szász, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
  • J. Száva, Transylvania University of Brasov, Brasov, Romania
  • P. Szemes, University of Debrecen, Debrecen, Hungary
  • E. Szűcs, University of Debrecen, Debrecen, Hungary
  • R. Tarca, University of Oradea, Oradea, Romania
  • Zs. Tiba, University of Debrecen, Debrecen, Hungary
  • L. Tóth, University of Debrecen, Debrecen, Hungary
  • A. Trnik, Constantine the Philosopher University in Nitra, Nitra, Slovakia
  • I. Uzmay, Erciyes University, Kayseri, Turkey
  • T. Vesselényi, University of Oradea, Oradea, Romania
  • N. S. Vyas, Indian Institute of Technology, Kanpur, India
  • D. White, The University of Adelaide, Adelaide, Australia
  • S. Yildirim, Erciyes University, Kayseri, Turkey

International Review of Applied Sciences and Engineering
Address of the institute: Faculty of Engineering, University of Debrecen
H-4028 Debrecen, Ótemető u. 2-4. Hungary
Email: irase@eng.unideb.hu

Indexing and Abstracting Services:

  • DOAJ
  • Google Scholar
  • ProQuest
  • SCOPUS
  • Ulrich's Periodicals Directory

 

2020  
Scimago
H-index
5
Scimago
Journal Rank
0,165
Scimago
Quartile Score
Engineering (miscellaneous) Q3
Environmental Engineering Q4
Information Systems Q4
Management Science and Operations Research Q4
Materials Science (miscellaneous) Q4
Scopus
Cite Score
102/116=0,9
Scopus
Cite Score Rank
General Engineering 205/297 (Q3)
Environmental Engineering 107/146 (Q3)
Information Systems 269/329 (Q4)
Management Science and Operations Research 139/166 (Q4)
Materials Science (miscellaneous) 64/98 (Q3)
Scopus
SNIP
0,26
Scopus
Cites
57
Scopus
Documents
36
Days from submission to acceptance 84
Days from acceptance to publication 348
Acceptance
Rate

23%

 

2019  
Scimago
H-index
4
Scimago
Journal Rank
0,229
Scimago
Quartile Score
Engineering (miscellaneous) Q2
Environmental Engineering Q3
Information Systems Q3
Management Science and Operations Research Q4
Materials Science (miscellaneous) Q3
Scopus
Cite Score
46/81=0,6
Scopus
Cite Score Rank
General Engineering 227/299 (Q4)
Environmental Engineering 107/132 (Q4)
Information Systems 259/300 (Q4)
Management Science and Operations Research 136/161 (Q4)
Materials Science (miscellaneous) 60/86 (Q3)
Scopus
SNIP
0,866
Scopus
Cites
35
Scopus
Documents
47
Acceptance
Rate
21%

 

International Review of Applied Sciences and Engineering
Publication Model Gold Open Access
Submission Fee none
Article Processing Charge 1100 EUR/article
Regional discounts on country of the funding agency World Bank Lower-middle-income economies: 50%
World Bank Low-income economies: 100%
Further Discounts Limited number of full waiver available. Editorial Board / Advisory Board members: 50%
Corresponding authors, affiliated to an EISZ member institution subscribing to the journal package of Akadémiai Kiadó: 100%
Subscription Information Gold Open Access
Purchase per Title  

International Review of Applied Sciences and Engineering
Language English
Size A4
Year of
Foundation
2010
Publication
Programme
2021 Volume 12
Volumes
per Year
1
Issues
per Year
3
Founder Debreceni Egyetem
Founder's
Address
H-4032 Debrecen, Hungary Egyetem tér 1
Publisher Akadémiai Kiadó
Publisher's
Address
H-1117 Budapest, Hungary 1516 Budapest, PO Box 245.
Responsible
Publisher
Chief Executive Officer, Akadémiai Kiadó
ISSN 2062-0810 (Print)
ISSN 2063-4269 (Online)

Monthly Content Usage

Abstract Views Full Text Views PDF Downloads
Feb 2021 0 3 3
Mar 2021 0 4 5
Apr 2021 0 3 3
May 2021 0 6 4
Jun 2021 0 2 6
Jul 2021 0 2 1
Aug 2021 0 0 0