View More View Less
  • 1 Budapest University of Technology and Economics, 1111 Budapest, Műegyetem rkp. 3. K.I.85., Hungary
Open access

The aim of the paper is primarily to evaluate the heating energy demand of an industrial hall. In the study, we have made multidimensional dynamic whole building simulations for describing coupled heat and moisture behaviour and energy consumption of the building with different internal loads and compared to the calculated energy consumption of the building according to the Hungarian and Austrian regulations. The walls and roof structure of the industrial building were made with insulated panel systems, the plinth wall was built with monolithic reinforced concrete with 12 cm of XPS insulation. The floor is made of steel fibre reinforced concrete, where 10 cm XPS perimeter insulation was applied. After the calculations, we insulated the floor on the whole surface with 10 cm XPS and investigated the modified structure’s heating energy demand too. In the paper, we analyse the energy consumption of the original and modified industrial building according to the monthly and seasonal calculations and the whole building dynamic simulations and evaluated the differences. Furthermore, we assessed the effect of internal loads, thermal bridges on the simulations.

  • [1]

    Sheng Y. , Miao Z., Zhang J., Lin X., Ma H. (2018), Energy consumption model and energy benchmarks of five-star hotels in China. Energy and Buildings, 165, 286292.

    • Search Google Scholar
    • Export Citation
  • [2]

    Silenzi F. , Priarone A., Fossa M. (2018), Hourly simulations of an hospital building for assessing the thermal demand and the best retrofit strategies for consumption reduction. Thermal Science and Engineering Progress, 6, 388397.

    • Search Google Scholar
    • Export Citation
  • [3]

    Gourlis G. , Kovacic I. (2016), A study on building performance analysis for energy retrofit of existing industrial facilities. Applied Energy, 184, 13891399.

    • Search Google Scholar
    • Export Citation
  • [4]

    Simson R. , Fadejev J., Kurnitski J., Kesti J., Lautso P. (2016), Assessment of retrofit measures for industrial halls: Energy efficiency and renovation budget estimation. Energy Procedia, 96, 124133.

    • Search Google Scholar
    • Export Citation
  • [5]

    Kuusk K. , Kurnitski J., Kalamees T. (2017), Calculation and compliance procedures of thermal bridges in energy calculations in various European countries. Energy Procedia, 132, 2732.

    • Search Google Scholar
    • Export Citation
  • [6]

    Nagy B. , Szagri D. (2017), Dynamic heat and moisture transport modeling of industrial floors on different climates. Applied Mechanics and Materials, 861, 271278.

    • Search Google Scholar
    • Export Citation
  • [7]

    Andaloro A. P. F. , Salomone R., Ioppolo G., Andaloro L. (2010), Energy certification of buildings: A comparative analysis of progress towards implementation in European countries. Energy Policy, 38(10), 58405866.

    • Search Google Scholar
    • Export Citation
  • [8]

    TNM Decree, No. 7/2006., http://njt.hu/cgi_bin/njt_doc.cgi?docid=101820.352718 (last visited 20 July 2018).

  • [9]

    OIB-Richtlinie 6, Energieeinsparung und Wä rmeschutz, https://www.oib.or.at/de/oib-richtlinien/richtlinien/2015/oib-richtlinie-6 (last visited 20 July 2018).

  • [10]

    Ge H. , Baba F. (2015), Dynamic effect of thermal bridges on the energy performance of a low-rise residential building. Energy and Buildings, 105, 106118.

    • Search Google Scholar
    • Export Citation
  • [11]

    Auricon EnergetiC 2.9.0. User’s Manual, 2018.

  • [12]

    ArchiPHYSIK 14.0.116. User’s Manual, 2017.

  • [13]

    ISO 6946:2017. Building components and building elements – Thermal resistance and thermal transmittance – Calculation methods

  • [14]

    ISO 13370:2017. Thermal performance of buildings – Heat transfer via the ground – Calculation methods

  • [15]

    Antretter F. , Sauer F., Schöpfer T., Holm A. (2011), Validation of a hygrothermal whole building simulation software. In: Proceedings of Building Simulation 2011: 12th Conference of International Building Performance Simulation Association, pp. 16941701.

    • Search Google Scholar
    • Export Citation
  • [16]

    WUfiPlus V.3.3.1.0. User’s Manual, 2017

  • [17]

    Antretter F. , Radon J., Pazold M. (2013), Coupling of dynamic thermal bridge and whole building simulation. In: Thermal Performance of the Exterior Envelopes of Whole Buildings XIIth International Conference, pp. 693701.

    • Search Google Scholar
    • Export Citation
  • [18]

    Nagy B. (2017), Building physics of ground contact structures, 3rd part: Large-scale ground contact floors (in Hungarian). Megtérülo Épületenergetika, 4(2), 3540.

    • Search Google Scholar
    • Export Citation
The author instruction is available in PDF.
Please, download the file from HERE.
Submit Your Manuscript
 

Senior editors

Editor-in-Chief: Ákos, Lakatos

Founder, former Editor-in-Chief (2011-2020): Ferenc Kalmár

Founding Editor: György Csomós

Associate Editor: Derek Clements Croome

Associate Editor: Dezső Beke

Editorial Board

  • M. N. Ahmad, Institute of Visual Informatics, Universiti Kebangsaan Malaysia, Malaysia
  • M. Bakirov, Center for Materials and Lifetime Management Ltd., Moscow, Russia
  • N. Balc, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
  • U. Berardi, Ryerson University, Toronto, Canada
  • I. Bodnár, University of Debrecen, Debrecen, Hungary
  • S. Bodzás, University of Debrecen, Debrecen, Hungary
  • F. Botsali, Selçuk University, Konya, Turkey
  • S. Brunner, Empa - Swiss Federal Laboratories for Materials Science and Technology
  • I. Budai, University of Debrecen, Debrecen, Hungary
  • C. Bungau, University of Oradea, Oradea, Romania
  • M. De Carli, University of Padua, Padua, Italy
  • R. Cerny, Czech Technical University in Prague, Czech Republic
  • Gy. Csomós, University of Debrecen, Debrecen, Hungary
  • T. Csoknyai, Budapest University of Technology and Economics, Budapest, Hungary
  • G. Eugen, University of Oradea, Oradea, Romania
  • J. Finta, University of Pécs, Pécs, Hungary
  • A. Gacsadi, University of Oradea, Oradea, Romania
  • E. A. Grulke, University of Kentucky, Lexington, United States
  • J. Grum, University of Ljubljana, Ljubljana, Slovenia
  • G. Husi, University of Debrecen, Debrecen, Hungary
  • G. A. Husseini, American University of Sharjah, Sharjah, United Arab Emirates
  • N. Ivanov, Peter the Great St.Petersburg Polytechnic University, St. Petersburg, Russia
  • A. Járai, Eötvös Loránd University, Budapest, Hungary
  • G. Jóhannesson, The National Energy Authority of Iceland, Reykjavik, Iceland
  • L. Kajtár, Budapest University of Technology and Economics, Budapest, Hungary
  • F. Kalmár, University of Debrecen, Debrecen, Hungary
  • T. Kalmár, University of Debrecen, Debrecen, Hungary
  • M. Kalousek, Brno University of Technology, Brno, Czech Republik
  • J. Koci, Czech Technical University in Prague, Prague, Czech Republic
  • V. Koci, Czech Technical University in Prague, Prague, Czech Republic
  • I. Kocsis, University of Debrecen, Debrecen, Hungary
  • I. Kovács, University of Debrecen, Debrecen, Hungary
  • É. Lovra, Univesity of Debrecen, Debrecen, Hungary
  • T. Mankovits, University of Debrecen, Debrecen, Hungary
  • I. Medved, Slovak Technical University in Bratislava, Bratislava, Slovakia
  • L. Moga, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
  • M. Molinari, Royal Institute of Technology, Stockholm, Sweden
  • H. Moravcikova, Slovak Academy of Sciences, Bratislava, Slovakia
  • P. Mukhophadyaya, University of Victoria, Victoria, Canada
  • B. Nagy, Budapest University of Technology and Economics, Budapest, Hungary
  • H. S. Najm, Rutgers University, New Brunswick, United States
  • J. Nyers, Subotica Tech - College of Applied Sciences, Subotica, Serbia
  • B. W. Olesen, Technical University of Denmark, Lyngby, Denmark
  • S. Oniga, North University of Baia Mare, Baia Mare, Romania
  • J. N. Pires, Universidade de Coimbra, Coimbra, Portugal
  • L. Pokorádi, Óbuda University, Budapest, Hungary
  • A. Puhl, University of Debrecen, Debrecen, Hungary
  • R. Rabenseifer, Slovak University of Technology in Bratislava, Bratislava, Slovak Republik
  • M. Salah, Hashemite University, Zarqua, Jordan
  • D. Schmidt, Fraunhofer Institute for Wind Energy and Energy System Technology IWES, Kassel, Germany
  • L. Szabó, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
  • Cs. Szász, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
  • J. Száva, Transylvania University of Brasov, Brasov, Romania
  • P. Szemes, University of Debrecen, Debrecen, Hungary
  • E. Szűcs, University of Debrecen, Debrecen, Hungary
  • R. Tarca, University of Oradea, Oradea, Romania
  • Zs. Tiba, University of Debrecen, Debrecen, Hungary
  • L. Tóth, University of Debrecen, Debrecen, Hungary
  • A. Trnik, Constantine the Philosopher University in Nitra, Nitra, Slovakia
  • I. Uzmay, Erciyes University, Kayseri, Turkey
  • T. Vesselényi, University of Oradea, Oradea, Romania
  • N. S. Vyas, Indian Institute of Technology, Kanpur, India
  • D. White, The University of Adelaide, Adelaide, Australia
  • S. Yildirim, Erciyes University, Kayseri, Turkey

International Review of Applied Sciences and Engineering
Address of the institute: Faculty of Engineering, University of Debrecen
H-4028 Debrecen, Ótemető u. 2-4. Hungary
Email: irase@eng.unideb.hu

Indexing and Abstracting Services:

  • DOAJ
  • Google Scholar
  • ProQuest
  • SCOPUS
  • Ulrich's Periodicals Directory

 

2020  
Scimago
H-index
5
Scimago
Journal Rank
0,165
Scimago
Quartile Score
Engineering (miscellaneous) Q3
Environmental Engineering Q4
Information Systems Q4
Management Science and Operations Research Q4
Materials Science (miscellaneous) Q4
Scopus
Cite Score
102/116=0,9
Scopus
Cite Score Rank
General Engineering 205/297 (Q3)
Environmental Engineering 107/146 (Q3)
Information Systems 269/329 (Q4)
Management Science and Operations Research 139/166 (Q4)
Materials Science (miscellaneous) 64/98 (Q3)
Scopus
SNIP
0,26
Scopus
Cites
57
Scopus
Documents
36
Days from submission to acceptance 84
Days from acceptance to publication 348
Acceptance
Rate

23%

 

2019  
Scimago
H-index
4
Scimago
Journal Rank
0,229
Scimago
Quartile Score
Engineering (miscellaneous) Q2
Environmental Engineering Q3
Information Systems Q3
Management Science and Operations Research Q4
Materials Science (miscellaneous) Q3
Scopus
Cite Score
46/81=0,6
Scopus
Cite Score Rank
General Engineering 227/299 (Q4)
Environmental Engineering 107/132 (Q4)
Information Systems 259/300 (Q4)
Management Science and Operations Research 136/161 (Q4)
Materials Science (miscellaneous) 60/86 (Q3)
Scopus
SNIP
0,866
Scopus
Cites
35
Scopus
Documents
47
Acceptance
Rate
21%

 

International Review of Applied Sciences and Engineering
Publication Model Gold Open Access
Submission Fee none
Article Processing Charge 1100 EUR/article
Regional discounts on country of the funding agency World Bank Lower-middle-income economies: 50%
World Bank Low-income economies: 100%
Further Discounts Limited number of full waiver available. Editorial Board / Advisory Board members: 50%
Corresponding authors, affiliated to an EISZ member institution subscribing to the journal package of Akadémiai Kiadó: 100%
Subscription Information Gold Open Access

International Review of Applied Sciences and Engineering
Language English
Size A4
Year of
Foundation
2010
Volumes
per Year
1
Issues
per Year
3
Founder Debreceni Egyetem
Founder's
Address
H-4032 Debrecen, Hungary Egyetem tér 1
Publisher Akadémiai Kiadó
Publisher's
Address
H-1117 Budapest, Hungary 1516 Budapest, PO Box 245.
Responsible
Publisher
Chief Executive Officer, Akadémiai Kiadó
ISSN 2062-0810 (Print)
ISSN 2063-4269 (Online)

Monthly Content Usage

Abstract Views Full Text Views PDF Downloads
Aug 2021 0 5 6
Sep 2021 0 4 5
Oct 2021 0 11 18
Nov 2021 0 3 12
Dec 2021 0 4 4
Jan 2022 0 1 7
Feb 2022 0 0 0