View More View Less
  • 1 MTA-ME Materials Science Research Group, , Miskolc-Egyetemvaros H-3515, , Hungary
  • | 2 University of Miskolc, , H-3515 Miskolc-Egyetemvaros, , Hungary
Open access

Six compositions in (Cu49Zr45Al6)100 − xyNixTiy (x = 0, 5, 10; y = 0, 5, 10) system were selected in order to investigate the amorphization progress caused by milling. The initial structure of the powders before milling, type, and composition of the phases and their influence on the amorphization process were examined. CuZr phase was found to be determinative phase of amorphization process; however, its size does not influence it significantly in this system. CuZr fully dissolved the alloying elements, so that Ni and Ti phases do not appear as independent phases. In most cases, after 15 h of milling, the powders had amorphous structure with a few nanosized crystalline particles. It was shown that addition of both 10% Ti and 10% Ni to the alloy was an optimum condition to get stable, amorphous structure already after 12 h of ball milling.

  • 1.

    Yokoyama Y , Inoue H, Fukaura K, Inoue A: Relationship between the liquidus surface and structures of Zr–Cu–Al bulk amorphous alloys. Mat Trans 43, 575579 (2002)

    • Search Google Scholar
    • Export Citation
  • 2.

    Wu Y , Wang H, Wu HH, Zhang ZY, Hui XD, Chen GL, Ma D, Wang XL, Lu ZP: Formation of Cu–Zr–Al bulk metallic glass composites with improved tensile properties. Acta Mater 59, 29282936 (2011)

    • Search Google Scholar
    • Export Citation
  • 3.

    Inoue A , Zhang W, Zhang T, Kurosaka K: Cu-based bulk glassy alloys with high tensile strength of over 2000 MPa. J Non-Cryst Solids 304, 200209 (2002)

    • Search Google Scholar
    • Export Citation
  • 4.

    Vincent S , Murty BS, Kramer MJ, Bhatt J: Micro and nano indentation studies on Zr60Cu10Al15Ni15 bulk metallic glass. Mater Des 65, 98103 (2015)

    • Search Google Scholar
    • Export Citation
  • 5.

    Zhang L , Chen Z, Zheng Q, Chen D: Isochronal and isothermal phase transformation of Cu45Zr45Ag7Al3 bulk metallic glass. Physica B 411, 149153 (2013)

    • Search Google Scholar
    • Export Citation
  • 6.

    Gu J , Song M, Ni S, Guo S, He Y: Effects of annealing on the hardness and elastic modulus of a Cu36Zr48Al8Ag8 bulk metallic glass. Mater Des 47, 706710 (2013)

    • Search Google Scholar
    • Export Citation
  • 7.

    Lee D-M , Sun J-H, Shin S-Y, Bae J-C, Lee C-H: Improvement of glass forming ability of Cu–Ni–Zr–Ti alloys by substitution of Hf and Nb. Mater Trans JIM 49, 14861489 (2008)

    • Search Google Scholar
    • Export Citation
  • 8.

    Ciu J , Li JS, Wang J, Kou HC, Qiao JC, Gravier S, Blandin JJ: Crystallization kinetics of Cu38Zr46Ag8Al8 bulk metallic glass in different heating conditions. J Non-Cryst Sol 404, 712 (2014)

    • Search Google Scholar
    • Export Citation
  • 9.

    Gonzalez S , Pérez P, Rossinyol E, Surinach S, Baró MD, Eva Pellicer E, Sort J: Drastic influence of minor Fe or Co additions on the glass forming ability, martensitic transformations and mechanical properties of shape memory Zr–Cu–Al bulk metallic glass composites. Sci Tech Adv Mater 15, 035015 (2014)

    • Search Google Scholar
    • Export Citation
  • 10.

    Coury FG , Botta WJ, Bolfarini C, Kiminami CS, Kaufman MJ: The role of yttrium and oxygen on the crystallization behavior of a Cu–Zr–Al metallic glass. J Non-Cryst Sol 406, 7987 (2014)

    • Search Google Scholar
    • Export Citation
  • 11.

    Su EL , Wu XQ, Zhang DC, Li Y, Lin JG: Effects of Si additions on the glass-forming ability and corrosion resistance of Cu49Zr45Al6bulk metallic glass. Corrosion 69, 10881094 (2013)

    • Search Google Scholar
    • Export Citation
  • 12.

    Lee SW , Huh MY, Fleury E, Lee JC: Crystallizationinduced plasticity of Cu–Zr containing bulk amorphous alloys. Acta Mater 54, 349355 (2006)

    • Search Google Scholar
    • Export Citation
  • 13.

    Wang D , Tan H, Li Y: Multiple maxima of GFA in three adjacent eutectics in Zr–Cu–Al alloy system — a metallographic way to pinpoint the best glass forming alloys. Acta Mater 53, 29692979 (2005)

    • Search Google Scholar
    • Export Citation
  • 14.

    Wang X , Wang D, Zhu B, Li Y, Han F: Crystallization kinetics and thermal stability of mechanically alloyed Al76Ni8-Ti8Zr4Y4 glassy powder. J Non-Cryst Sol 385, 111116 (2014)

    • Search Google Scholar
    • Export Citation
  • 15.

    Takeuchi A , Inoue A: Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element. Mat Trans 46, 28172829 (2005)

    • Search Google Scholar
    • Export Citation
  • 16.

    Oleszak D , Kulik T: Influence of Sn addition on the amorphization and thermal stability of CuTiZrNi powders processed by mechanical alloying. Mater Sci Forum 636–637, 917921 (2010)

    • Search Google Scholar
    • Export Citation
  • 17.

    Dutkiewicz J , Jaworska L, MaziarzW, Czeppe T, Lejkowska M, Kubicek M, Pastrnák M: Consolidation of amorphous ball-milled Zr–Cu–Al and Zr–Ni–Ti–Cu powders. J Alloys Compd 434–435, 333335 (2007)

    • Search Google Scholar
    • Export Citation
  • 18.

    Kishimura H , Matsumoto H: Fabrication of Ti–Cu–Ni–Al amorphous alloys by mechanical alloying and mechanical milling. J Alloys Compd 509, 43864389 (2011)

    • Search Google Scholar
    • Export Citation
  • 19.

    Siegrist ME , Siegfried M, Löffler JF: High-purity amorphous Zr52.5Cu17.9Ni14.6 Al10Ti5 powders via mechanical amorphization of crystalline pre-alloys. Mater Sci Eng A 418, 236240 (2006)

    • Search Google Scholar
    • Export Citation
  • 20.

    Zhao YH : Thermodynamic model for solid-state amorphization of pure elements by mechanical-milling. J Non-Cryst Solids 352, 55785585 (2006)

    • Search Google Scholar
    • Export Citation
  • 21.

    Bhatt J , Murty BS: On the conditions for the synthesis of bulk metallic glasses by mechanical alloying. J Alloys Compd 459, 135141 (2008)

    • Search Google Scholar
    • Export Citation
  • 22.

    Tomolya K , Janovszky D, Benke M, Sycheva A, Sveda M, Ferenczi T, Pekker P, Cora I, Roosz A: Microstructure evolution in CuZrAl alloys during ball-milling. J Non-Cryst Sol 382, 105111 (2013)

    • Search Google Scholar
    • Export Citation
  • 23.

    Tomolya K , Janovszky D, Janvari T, Sycheva A, Tranta F, Solyom J, Ferenczi T, Roosz A: Consolidation of Cu58Zr42 amorphous/nanocrystalline powders by PM. J Alloys Compd 536, S154–S158 (2012)

    • Search Google Scholar
    • Export Citation
  • 24.

    Körösy G , Tomolya K, Janovszky D, Sólyom J: Evaluation of XRD analysis of amorphous alloys. Mater Sci Forum 729, 419423 (2013)

  • 25.

    Yan X , Chen X-Q, Grytsiv A, Rogl P, Podloucky R, Pomjakushin V, Schmidt H, Giester G: Crystal structure, phase stability and elastic properties of the Laves phase ZrTiCu2. Intermetallics 16, 651657 (2008)

    • Search Google Scholar
    • Export Citation
  • 26.

    Klug HP , Alexander LE: X-ray Diffraction Procedures for Polycrystalline and Amorphous Materials, Chapman, & Hall, London 491 pp (1954)

  • 27.

    Jayalakshmi S , Sahu S, Sankaranarayanan S, Gupta S, Gupta M: Development of novel Mg–Ni60Nb40 amorphous particle reinforced composites with enhanced hardness and compressive response. Mater Des 53, 849855 (2014)

    • Search Google Scholar
    • Export Citation

 

 

You can download the Article Template Guideline from HERE

 

 

Senior editors

Editor(s)-in-Chief: Béla Pécz

Managing Editor(s): Katalin Balázsi

Co-Editor-in-Chief: Rafal Dunin-Borkowski
(for theory and microscopy techniques)

Co-Editor-in-Chief: Pavel Hozak
(for biomedical sciences)

Editorial Board

  • Filippo Giannazzo - Consiglio Nazionale delle Ricerche (CNR), Institute for Microelectronics and Microsystems (IMM), Catania, Italy
  • Werner Grogger - FELMI, Graz University of Technology, Graz, Austria
  • János Lábár - Institute of Technical Physics and Materials Science, Centre for Energy Research, Hungary
  • Erik Manders - Faculty of Science, SILS, University of Amsterdam, Amsterdam, The Netherlands
  • Ohad Medalia - Department of Biochemistry, Zürich University, Zürich, Switzerland
  • Rainer Pepperkok - EMBL, Heidelberg, Germany
  • Aleksander Recnik - J. Stefan Institute, Ljubljana, Slovenia
  • Sara Sandin - Division of Structural Biology & Biochemistry, School of Biological Sciences, Nanyang Technological University, Singapore
  • Nobuo Tanaka - Electron microscope Lab., Ecotopia Science Institute and Dept. of Applied Physics, Nagoya University, Japan
  • Paul Verkade - Wolfson Bioimaging Facility, Schools of Biochemistry and Physiology & Pharmacology, Biomedical Sciences Building, University of Bristol, Bristol, UK

Dr Pécz, Béla
Resolution and Discovery
Institute of Technical Physics and Materials Science
Centre for Energy Research
H-1525 Budapest, PO Box 49, Hungary
E-mail: pecz.bela@ek-cer.hu

Indexing and Abstracting Services:

  • DOAJ

 

 

2020  
CrossRef Documents 3
WoS Cites 7
Wos H-index 2
Days from submission to acceptance 122
Days from acceptance to publication 121
Acceptance Rate 38%

2019  
WoS
Cites
6
CrossRef
Documents
5
Acceptance
Rate
17%

 

Resolution and Discovery
Publication Model Gold Open Access
Submission Fee none
Article Processing Charge none
Regional discounts on country of the funding agency World Bank Lower-middle-income economies: 50%
World Bank Low-income economies: 100%
Further Discounts Editorial Board / Advisory Board members: 50%
Corresponding authors, affiliated to an EISZ member institution subscribing to the journal package of Akadémiai Kiadó: 100%
Subscription Information Gold Open Access
Purchase per Title  

Resolution and Discovery
Language English
Size A4
Year of
Foundation
2015
Publication
Programme
2021 Volume 6
Volumes
per Year
1
Issues
per Year
 
Founder Akadémiai Kiadó
Founder's
Address
H-1117 Budapest, Hungary 1516 Budapest, PO Box 245.
Publisher Akadémiai Kiadó
Publisher's
Address
H-1117 Budapest, Hungary 1516 Budapest, PO Box 245.
Responsible
Publisher
Chief Executive Officer, Akadémiai Kiadó
ISSN 2498-8707 (Online)