Pollack Periodica
Volume/Issue:
Volume 14: Issue 2
New approach for estimation of incident energy on high voltage level
Authors:
Bálint G. Halász Budapest University of Technology and Economics, Egry J. utca 18, H-1111 Budapest, Hungary

Search for other papers by Bálint G. Halász in
Current site
Google Scholar
PubMed Close
,
Bálint Németh Budapest University of Technology and Economics, Egry J. utca 18, H-1111 Budapest, Hungary

Search for other papers by Bálint Németh in
Current site
Google Scholar
PubMed Close
, and
István Kiss Budapest University of Technology and Economics, Egry J. utca 18, H-1111 Budapest, Hungary

Search for other papers by István Kiss in
Current site
Google Scholar
PubMed Close
Pages:
235–246
Online Publication Date:
Aug 2019
Publication Date:
01 Aug 2019
Article Category:
Research Article
DOI:
https://doi.org/10.1556/606.2019.14.2.21
Keywords:
Arc protection; High voltage; High current; Electric arc; Live-line maintenance
Open access

Abstract

The purpose of this paper is to show a new calculation model, which is able to calculate the incident energy in any places near an electric arc in case of high voltage, without neglecting of length and position of the electric arc. This method is developed especially for the electric transmission network above 35 kV and several meters of gap distances. It would be used to estimate the thermal load of a power line worker close an initiated electric arc during live-line maintenance by bare-hand and hot stick method as well.

  • [1]

    Lee R. H. The other electrical hazard: electric arc blast burns, IEEE Trans. Ind. Appl, Vol. IA-18, No. 3, 1982, pp. 246–251.

  • [2]

    Wright A. Newbery P. G. Electric fuses, 3rd Edition, The Institution of Electrical Engineers, London, United Kingdom, 2004

  • [3]

    Magmood F. , Elkalashy N. I., Lehtonen M. Modeling of flashover arcs in medium voltage networks dure to direct lightning strikes, Electrical Power and Energy Systems, Vol. 65, 2015, pp. 59–69.

    • Search Google Scholar
    • Export Citation
  • [4]

    Kanokbannakorn W. , Hongesombut K., Teerakawanich N., Srisonphan S. Arc flash hazard in distribution system with distributed generation, Procedia Computer Science, Vol. 86, 2016, pp. 377–380.

    • Search Google Scholar
    • Export Citation
  • [5]

    Khakpour A. , Uhrlandt D., Methling R. P., Gortschakow S., Franke S., Imani M. T., Weltmann K. D. Impact of temperature changing on voltage and power of an electric arc, Electric Power Systems Research, Vol. 143, 2017, pp. 73–83.

    • Search Google Scholar
    • Export Citation
  • [6]

    Regulation/Strandard 29CFR , Appendix E to subpart V of Part 1926 - Protection from flames and electric arcs, 1926, https://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=871, (last visited 23 April 2018).

    • Search Google Scholar
    • Export Citation
  • [7]

    IEEE Std. 1584-2002 , IEEE guide for performing arc-flash hazard calculations, 2002.

  • [8]

    NFPA 70E , Standard for electrical safety in the workplace, 2012.

  • [9]

    Arc flash issues in transmission and substation environments: Results from tests with long arcs, Technical Report, Electric Power Research Institute, 2011, Paper 1022632.

    • Search Google Scholar
    • Export Citation
  • [10]

    Friedl G. , Kuczmann M. Edge finite element method in case of high frequency simulations, Pollack Periodica, Vol. 10, No. 3, 2015, pp. 59–70.

    • Search Google Scholar
    • Export Citation
  • [11]

    Marcsa D. , Kuczmann M. Parallel solution of an electrostatic field problem - case study, Pollack Periodica, Vol. 7. No. 2, 2012, pp. 25–34, 2012.

    • Search Google Scholar
    • Export Citation
  • [12]

    Goda Y. , Iwata M., Ikeda K., Tanaka S. Arc voltage characteristics of high current fault, IEEE Transaction on Power Delivery, Vol. 15, No. 2, 2000, pp. 791–795.

    • Search Google Scholar
    • Export Citation
  • [13]

    Geszti P. O. Electric power systems, Vol. 1, (in Hungarian), Tankönyvkiadó, Budapest, 1986.

  • [14]

    Hoagland E. , Golovkov M., Maurice C., Clark P. Clothing in arc flash: four types of arc exposure and the effect of moisture on garment appearance after an arc event, IEEE Transactions on Industry Applications, Vol. 50, No. 4, 2014, pp. 2370–2374.

    • Search Google Scholar
    • Export Citation
  • [15]

    Golovkov M. , Schau H., Habil I. Effect of arc electrode geometry and distance on FR fabric protection properties against second degree skin burn, 2016 IEEE IAS Electrical Safety Workshop, Jacksonville, FL, USA, 6–11 March 2016, Doi: 10.1109/ESW.2016.7499705.

    • Search Google Scholar
    • Export Citation
  • [16]

    McDermid W. , Swatek D. R., Bromley J. C. Progress in resolving flashovers of FRP hot sticks during EHV live line work, Conference Record on the 2004 IEEE International Symposium on Electrical Insulation, Indianapolis, IN USA, 19–22 September 2004, Doi: 10.1109/ELINSL.2004.1380690.

    • Search Google Scholar
    • Export Citation
  • [17]

    McDermid W. , Swatek D. R., Bromley J. C. FRP hot stick flashovers during EHV live line work, Conference on Electrical Insulation Conference and Electrical Manufacturing and Coil Winding Technology, Indianapolis, Indiana, USA, 25–25 September 2003, Doi: 10.1109/EICEMC.2003.1247844.

    • Search Google Scholar
    • Export Citation
  • [18]

    McDermid W. , Bromley J. C., Dodds D. J., Swatek D. R. Investigation of the flashover of a FRP hot stick while in use for live line work at 500 kV, IEEE Transactions on Power Delivery, Vol. 14, No. 3, July 1999, pp. 1158–1166.

    • Search Google Scholar
    • Export Citation
  • [19]

    Live working - Conducting clothing for use at nominal voltage up to 800 kV a.c. and +/− 600 kV d.c., IEC 60895 Standard, 2002

  • Collapse
  • Expand
Cover Pollack Periodica
Pollack Periodica
Print ISSN:
1788-1994
Online ISSN:
1788-3911

Senior editors

Editor(s)-in-Chief: Iványi, Amália

Editor(s)-in-Chief: Iványi, Péter

 

Scientific Secretary

Miklós M. Iványi

Editorial Board

  • Bálint Bachmann (Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Jeno Balogh (Department of Civil Engineering Technology, Metropolitan State University of Denver, Denver, Colorado, USA)
  • Radu Bancila (Department of Geotechnical Engineering and Terrestrial Communications Ways, Faculty of Civil Engineering and Architecture, “Politehnica” University Timisoara, Romania)
  • Charalambos C. Baniotopolous (Department of Civil Engineering, Chair of Sustainable Energy Systems, Director of Resilience Centre, School of Engineering, University of Birmingham, U.K.)
  • Oszkar Biro (Graz University of Technology, Institute of Fundamentals and Theory in Electrical Engineering, Austria)
  • Ágnes Borsos (Institute of Architecture, Department of Interior, Applied and Creative Design, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Matteo Bruggi (Dipartimento di Ingegneria Civile e Ambientale, Politecnico di Milano, Italy)
  • Petra Bujňáková (Department of Structures and Bridges, Faculty of Civil Engineering, University of Žilina, Slovakia)
  • Anikó Borbála Csébfalvi (Department of Civil Engineering, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Mirjana S. Devetaković (Faculty of Architecture, University of Belgrade, Serbia)
  • Szabolcs Fischer (Department of Transport Infrastructure and Water Resources Engineering, Faculty of Architerture, Civil Engineering and Transport Sciences Széchenyi István University, Győr, Hungary)
  • Radomir Folic (Department of Civil Engineering, Faculty of Technical Sciences, University of Novi Sad Serbia)
  • Jana Frankovská (Department of Geotechnics, Faculty of Civil Engineering, Slovak University of Technology in Bratislava, Slovakia)
  • János Gyergyák (Department of Architecture and Urban Planning, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Kay Hameyer (Chair in Electromagnetic Energy Conversion, Institute of Electrical Machines, Faculty of Electrical Engineering and Information Technology, RWTH Aachen University, Germany)
  • Elena Helerea (Dept. of Electrical Engineering and Applied Physics, Faculty of Electrical Engineering and Computer Science, Transilvania University of Brasov, Romania)
  • Ákos Hutter (Department of Architecture and Urban Planning, Institute of Architecture, Faculty of Engineering and Information Technolgy, University of Pécs, Hungary)
  • Károly Jármai (Institute of Energy and Chemical Machinery, Faculty of Mechanical Engineering and Informatics, University of Miskolc, Hungary)
  • Teuta Jashari-Kajtazi (Department of Architecture, Faculty of Civil Engineering and Architecture, University of Prishtina, Kosovo)
  • Róbert Kersner (Department of Technical Informatics, Institute of Information and Electrical Technology, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Rita Kiss  (Biomechanical Cooperation Center, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, Budapest, Hungary)
  • István Kistelegdi  (Department of Building Structures and Energy Design, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Stanislav Kmeť (President of University Science Park TECHNICOM, Technical University of Kosice, Slovakia)
  • Imre Kocsis  (Department of Basic Engineering Research, Faculty of Engineering, University of Debrecen, Hungary)
  • László T. Kóczy (Department of Information Sciences, Faculty of Mechanical Engineering, Informatics and Electrical Engineering, University of Győr, Hungary)
  • Dražan Kozak (Faculty of Mechanical Engineering, Josip Juraj Strossmayer University of Osijek, Croatia)
  • György L. Kovács (Department of Technical Informatics, Institute of Information and Electrical Technology, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Balázs Géza Kövesdi (Department of Structural Engineering, Faculty of Civil Engineering, Budapest University of Engineering and Economics, Budapest, Hungary)
  • Tomáš Krejčí (Department of Mechanics, Faculty of Civil Engineering, Czech Technical University in Prague, Czech Republic)
  • Jaroslav Kruis (Department of Mechanics, Faculty of Civil Engineering, Czech Technical University in Prague, Czech Republic)
  • Miklós Kuczmann (Department of Automations, Faculty of Mechanical Engineering, Informatics and Electrical Engineering, Széchenyi István University, Győr, Hungary)
  • Tibor Kukai (Department of Engineering Studies, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Maria Jesus Lamela-Rey (Departamento de Construcción e Ingeniería de Fabricación, University of Oviedo, Spain)
  • János Lógó  (Department of Structural Mechanics, Faculty of Civil Engineering, Budapest University of Technology and Economics, Hungary)
  • Carmen Mihaela Lungoci (Faculty of Electrical Engineering and Computer Science, Universitatea Transilvania Brasov, Romania)
  • Frédéric Magoulés (Department of Mathematics and Informatics for Complex Systems, Centrale Supélec, Université Paris Saclay, France)
  • Gabriella Medvegy (Department of Interior, Applied and Creative Design, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Tamás Molnár (Department of Visual Studies, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Ferenc Orbán (Department of Mechanical Engineering, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Zoltán Orbán (Department of Civil Engineering, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Dmitrii Rachinskii (Department of Mathematical Sciences, The University of Texas at Dallas, Texas, USA)
  • Chro Radha (Chro Ali Hamaradha) (Sulaimani Polytechnic University, Technical College of Engineering, Department of City Planning, Kurdistan Region, Iraq)
  • Maurizio Repetto (Department of Energy “Galileo Ferraris”, Politecnico di Torino, Italy)
  • Zoltán Sári (Department of Technical Informatics, Institute of Information and Electrical Technology, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Grzegorz Sierpiński (Department of Transport Systems and Traffic Engineering, Faculty of Transport, Silesian University of Technology, Katowice, Poland)
  • Zoltán Siménfalvi (Institute of Energy and Chemical Machinery, Faculty of Mechanical Engineering and Informatics, University of Miskolc, Hungary)
  • Andrej Šoltész (Department of Hydrology, Faculty of Civil Engineering, Slovak University of Technology in Bratislava, Slovakia)
  • Zsolt Szabó (Faculty of Information Technology and Bionics, Pázmány Péter Catholic University, Hungary)
  • Mykola Sysyn (Chair of Planning and Design of Railway Infrastructure, Institute of Railway Systems and Public Transport, Technical University of Dresden, Germany)
  • András Timár (Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Barry H. V. Topping (Heriot-Watt University, UK, Faculty of Engineering and Information Technology, University of Pécs, Hungary)

POLLACK PERIODICA
Pollack Mihály Faculty of Engineering
Institute: University of Pécs
Address: Boszorkány utca 2. H–7624 Pécs, Hungary
Phone/Fax: (36 72) 503 650

E-mail: peter.ivanyi@mik.pte.hu 

or amalia.ivanyi@mik.pte.hu

Indexing and Abstracting Services:

  • SCOPUS
  • CABELLS Journalytics

 

2024  
Scopus  
CiteScore  
CiteScore rank  
SNIP  
Scimago  
SJR index 0.385
SJR Q rank Q3

2023  
Scopus  
CiteScore 1.5
CiteScore rank Q3 (Civil and Structural Engineering)
SNIP 0.849
Scimago  
SJR index 0.288
SJR Q rank Q3

Pollack Periodica
Publication Model Hybrid
Submission Fee none
Article Processing Charge 900 EUR/article
Printed Color Illustrations 40 EUR (or 10 000 HUF) + VAT / piece
Regional discounts on country of the funding agency World Bank Lower-middle-income economies: 50%
World Bank Low-income economies: 100%
Further Discounts Editorial Board / Advisory Board members: 50%
Corresponding authors, affiliated to an EISZ member institution subscribing to the journal package of Akadémiai Kiadó: 100%
Subscription fee 2025 Online subsscription: 381 EUR / 420 USD
Print + online subscription: 456 EUR / 520 USD
Subscription Information Online subscribers are entitled access to all back issues published by Akadémiai Kiadó for each title for the duration of the subscription, as well as Online First content for the subscribed content.
Purchase per Title Individual articles are sold on the displayed price.

 

Pollack Periodica
Language English
Size A4
Year of
Foundation		 2006
Volumes
per Year		 1
Issues
per Year		 3
Founder Faculty of Engineering and Information Technology, University of Pécs
Founder's
Address		 H–7624 Pécs, Hungary, Boszorkány utca 2.
Publisher Akadémiai Kiadó
Publisher's
Address		 H-1117 Budapest, Hungary 1516 Budapest, PO Box 245.
Responsible
Publisher		 Chief Executive Officer, Akadémiai Kiadó
ISSN 1788-1994 (Print)
ISSN 1788-3911 (Online)

Monthly Content Usage

Abstract Views Full Text Views PDF Downloads
Dec 2024 0 2 4
Jan 2025 0 5 12
Feb 2025 0 4 3
Mar 2025 0 15 6
Apr 2025 0 3 10
May 2025 0 2 5
Jun 2025 0 0 0