Recommended seismic design provisions for new moment frame buildings, Report FEMA 350, Federal Emergency Management Agency, Washington DC, 2000.
Yang C-S, Leon R. T., DesRoches R. Pushover response of a braced frame with suspended zipper struts, Journal of Structural Engineering, Vol. 134, No. 10, 2008, pp. 1619‒1626.
Sabelli R., Mahin S., Chang C. Seismic demands on steel braced-frame buildings with buckling-restrained braces, Engineering Structures, Vol. 25, No. 5, 2003, pp. 655‒666.
Uang C. M., Nakashima M. Steel buckling-restrained braced frames, Chapter 16 in Earthquake Engineering: Recent Advances and Applications, Y. Bozorgnia, V. V. Bertero, (Eds.) CRC Press, Boca Raton, FL, 2003.
Usami T., Wang C., Funayamac J. Low-cycle fatigue tests of a type of buckling restrained braces, Procedia Engineering, Vol. 14, 2011, pp. 956‒964.
Jose A. Sy., Naveed A. Aung T. H., Rayamajhi D. Application of buckling restrained braces in 50 storey building, International Journal of High Rise Buildings, Vol. 3, No. 1, 2014, pp. 81‒87.
Astaneh-Asl A. Seismic studies of innovative and traditional composite shear walls, Research project in-progress, Dept. of Civil and Env. Engineering, Univ. of California, Berkeley, Sponsor: National Science Foundation; 1998–2000.
Driver R. G., Abbas H. H., Sause R. Local buckling of grouted and ungrouted internally stiffened double-plate HPS webs, Journal of Constructional Steel Research, Vol. 58, No. 5-8, 2002, pp. 881–906.
Ryu H., Chang S., Kim Y., Kim B. Crack control of a steel and concrete composite plate girder with prefabricated slabs under hogging moments, Engineering Structures, Vol. 27, No. 11, 2005, pp. 1613–1624.
ASCE 7-10, Standard, Minimum design loads for buildings and other structures, American Society of Civil Engineering, USA, 2010.
ANSI/AISC 360-10, Standard, Specification for structural steel buildings, American Institute Code of Steel Construction, Chicago, IL, 2010.
Brando G. Experimental tests on bracing type pure aluminum shear panels, Pollack Periodica, Vol. 2, No. 3, 2007, pp. 73‒84.
Esposto M. FEM modeling of PTED beam-to column connections for earthquake resisting steel frames, Pollack Periodica, Vol. 2, No. 1, 2007, pp. 101‒112.
Csébfalvi A. A hybrid meta-heuristic method for continuous engineering optimization, Periodica Polytechnica, Civil Engineering, Vol. 53, No. 2, 2009, pp. 93–100.