Authors:
T. T. Zhang University of Victoria, British Columbia, Canada

Search for other papers by T. T. Zhang in
Current site
Google Scholar
PubMed
Close
and
P. Mukhopadhyaya University of Victoria, British Columbia, Canada

Search for other papers by P. Mukhopadhyaya in
Current site
Google Scholar
PubMed
Close
Open access

Thermal bridging caused by exposed concrete balcony slab is a major source of heat loss through energy efficient building envelopes. Moreover, thermal bridging can also create moisture management and indoor comfort challenges. Numerous investigations have been carried out to reduce heat transmittance through exterior building envelopes and minimize the energy use in buildings. The most effective way to minimize heat transmittance of exposed concrete balcony slabs is to thermally separate the exterior structure from the interior structure using thermal breaks. To enhance thermal separation, this paper investigates the effects of replacing high conductive materials such as reinforced concrete or structural steel with a multilayer composition of high-performance hybrid insulating systems. Reinforcing bars, such as fiber reinforced plastics (FRPs), having lower thermal conductivity than steel are used to connect interior to exterior and transfer loads. Numerical simulation tool THERM is used to study the effects of thermal breaks on energy performance of the concrete slab balcony joints. Simulation results indicate significant thermal performance improvement while high-performance hybrid insulating systems were used for exposed concrete balcony slab constructions, compared to traditional insulating systems used in similar constructions

  • Finch G. , Higgins J., Hanam B. (2014), The Importance of Balcony and Slab Edge Thermal Bridges in Concrete Construction. 14th Canadian Conference on Building Science and Technology, Toronto, Ontario, Canada.

    • Search Google Scholar
    • Export Citation
  • Ge H. , McClung V., Zhang S. (2013), Impact of Balcony Thermal Bridges on The Overall Thermal Performance of Multi-Unit Residential Buildings: A Case Study. Energy and Buildings, 60, 163173.

    • Search Google Scholar
    • Export Citation
  • Kalnæs S. , Jelle B. (2014), Vacuum Insulation Panel Product: A State-of-The-Art Review and Future Research Pathways. Applied Energy, 116, 355375.

    • Search Google Scholar
    • Export Citation
  • Lawrenece Berkeley National Laboratory. 2013. THERM 6.3/WINDOW 6.3 NFRC Simulation Manual. THERM 7 Documentation. [Online]. Availabe: https://windows.lbl.gov/software/NFRC/SimMan/NFRCSim6.3-2013-07-Manual.pdf.

    • Search Google Scholar
    • Export Citation
  • Morrison Hershfield. 2014. Design Guide Schöck Isokorb©–Solutions to Prevent Thermal Bridging. [online]. Available: http://www.schockus.com/upload/documents/flashbook/en_us/isokorb_/design_guide_schoeck_isokorb_solutions_to_prevent__15-01-13_5752/index.html#24.

    • Search Google Scholar
    • Export Citation
  • Natural Resources Canada. 2013. Comprehensive Energy Use Database, Residential Sector –Table 2. [Online]. Avaliable: https://oee.nrcan.gc.ca/corporate/statistics/neud/dpa/show-Table.cfm?type=CP&sector=res&juris=ca&rn=2&page=0.

    • Search Google Scholar
    • Export Citation
  • RDH Building Engineering Ltd. 2014. The Importance of Slab Edge and Balcony Thermal Bridges.

  • Simmler H. , Brunner S., Heinemann U., Schwab H., Kumaran K., Mukhopadhyaya P., Quénard D., Sallée H., Noller K., Kücükpinar-Niarchos E., Stramm C., Tenpierik M., Cauberg H., Erb M. (2005), Study on VIP-components and panels for service life prediction of VIP in building applications (Subtask A). IEA/ECBCS Annex, 39, 1157.

    • Search Google Scholar
    • Export Citation
  • Schöck Design Department. 2015. Schöck Isokorb Technical Manual, U.S. Edition. Princeton, USA.

  • Totten P. , O’Brien M., Pazera M. (2008), The Effects of Thermal Bridging at Interface Conditions Building. Enclosure Science & Technology. Minnesota, USA.

    • Search Google Scholar
    • Export Citation
  • Collapse
  • Expand
The author instructions are available in PDF.
Please, download the file from HERE

 

Senior editors

Editor-in-Chief: Ákos, LakatosUniversity of Debrecen, Hungary

Founder, former Editor-in-Chief (2011-2020): Ferenc Kalmár, University of Debrecen, Hungary

Founding Editor: György Csomós, University of Debrecen, Hungary

Associate Editor: Derek Clements Croome, University of Reading, UK

Associate Editor: Dezső Beke, University of Debrecen, Hungary

Editorial Board

  • Mohammad Nazir AHMAD, Institute of Visual Informatics, Universiti Kebangsaan Malaysia, Malaysia

    Murat BAKIROV, Center for Materials and Lifetime Management Ltd., Moscow, Russia

    Nicolae BALC, Technical University of Cluj-Napoca, Cluj-Napoca, Romania

    Umberto BERARDI, Toronto Metropolitan University, Toronto, Canada

    Ildikó BODNÁR, University of Debrecen, Debrecen, Hungary

    Sándor BODZÁS, University of Debrecen, Debrecen, Hungary

    Fatih Mehmet BOTSALI, Selçuk University, Konya, Turkey

    Samuel BRUNNER, Empa Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland

    István BUDAI, University of Debrecen, Debrecen, Hungary

    Constantin BUNGAU, University of Oradea, Oradea, Romania

    Shanshan CAI, Huazhong University of Science and Technology, Wuhan, China

    Michele De CARLI, University of Padua, Padua, Italy

    Robert CERNY, Czech Technical University in Prague, Prague, Czech Republic

    Erdem CUCE, Recep Tayyip Erdogan University, Rize, Turkey

    György CSOMÓS, University of Debrecen, Debrecen, Hungary

    Tamás CSOKNYAI, Budapest University of Technology and Economics, Budapest, Hungary

    Anna FORMICA, IASI National Research Council, Rome, Italy

    Alexandru GACSADI, University of Oradea, Oradea, Romania

    Eugen Ioan GERGELY, University of Oradea, Oradea, Romania

    Janez GRUM, University of Ljubljana, Ljubljana, Slovenia

    Géza HUSI, University of Debrecen, Debrecen, Hungary

    Ghaleb A. HUSSEINI, American University of Sharjah, Sharjah, United Arab Emirates

    Nikolay IVANOV, Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russia

    Antal JÁRAI, Eötvös Loránd University, Budapest, Hungary

    Gudni JÓHANNESSON, The National Energy Authority of Iceland, Reykjavik, Iceland

    László KAJTÁR, Budapest University of Technology and Economics, Budapest, Hungary

    Ferenc KALMÁR, University of Debrecen, Debrecen, Hungary

    Tünde KALMÁR, University of Debrecen, Debrecen, Hungary

    Milos KALOUSEK, Brno University of Technology, Brno, Czech Republik

    Jan KOCI, Czech Technical University in Prague, Prague, Czech Republic

    Vaclav KOCI, Czech Technical University in Prague, Prague, Czech Republic

    Imre KOCSIS, University of Debrecen, Debrecen, Hungary

    Imre KOVÁCS, University of Debrecen, Debrecen, Hungary

    Angela Daniela LA ROSA, Norwegian University of Science and Technology, Trondheim, Norway

    Éva LOVRA, Univeqrsity of Debrecen, Debrecen, Hungary

    Elena LUCCHI, Eurac Research, Institute for Renewable Energy, Bolzano, Italy

    Tamás MANKOVITS, University of Debrecen, Debrecen, Hungary

    Igor MEDVED, Slovak Technical University in Bratislava, Bratislava, Slovakia

    Ligia MOGA, Technical University of Cluj-Napoca, Cluj-Napoca, Romania

    Marco MOLINARI, Royal Institute of Technology, Stockholm, Sweden

    Henrieta MORAVCIKOVA, Slovak Academy of Sciences, Bratislava, Slovakia

    Phalguni MUKHOPHADYAYA, University of Victoria, Victoria, Canada

    Balázs NAGY, Budapest University of Technology and Economics, Budapest, Hungary

    Husam S. NAJM, Rutgers University, New Brunswick, USA

    Jozsef NYERS, Subotica Tech College of Applied Sciences, Subotica, Serbia

    Bjarne W. OLESEN, Technical University of Denmark, Lyngby, Denmark

    Stefan ONIGA, North University of Baia Mare, Baia Mare, Romania

    Joaquim Norberto PIRES, Universidade de Coimbra, Coimbra, Portugal

    László POKORÁDI, Óbuda University, Budapest, Hungary

    Roman RABENSEIFER, Slovak University of Technology in Bratislava, Bratislava, Slovak Republik

    Mohammad H. A. SALAH, Hashemite University, Zarqua, Jordan

    Dietrich SCHMIDT, Fraunhofer Institute for Wind Energy and Energy System Technology IWES, Kassel, Germany

    Lorand SZABÓ, Technical University of Cluj-Napoca, Cluj-Napoca, Romania

    Csaba SZÁSZ, Technical University of Cluj-Napoca, Cluj-Napoca, Romania

    Ioan SZÁVA, Transylvania University of Brasov, Brasov, Romania

    Péter SZEMES, University of Debrecen, Debrecen, Hungary

    Edit SZŰCS, University of Debrecen, Debrecen, Hungary

    Radu TARCA, University of Oradea, Oradea, Romania

    Zsolt TIBA, University of Debrecen, Debrecen, Hungary

    László TÓTH, University of Debrecen, Debrecen, Hungary

    László TÖRÖK, University of Debrecen, Debrecen, Hungary

    Anton TRNIK, Constantine the Philosopher University in Nitra, Nitra, Slovakia

    Ibrahim UZMAY, Erciyes University, Kayseri, Turkey

    Andrea VALLATI, Sapienza University, Rome, Italy

    Tibor VESSELÉNYI, University of Oradea, Oradea, Romania

    Nalinaksh S. VYAS, Indian Institute of Technology, Kanpur, India

    Deborah WHITE, The University of Adelaide, Adelaide, Australia

International Review of Applied Sciences and Engineering
Address of the institute: Faculty of Engineering, University of Debrecen
H-4028 Debrecen, Ótemető u. 2-4. Hungary
Email: irase@eng.unideb.hu

Indexing and Abstracting Services:

  • DOAJ
  • ERIH PLUS
  • Google Scholar
  • ProQuest
  • SCOPUS
  • Ulrich's Periodicals Directory

 

2023  
Scimago  
Scimago
H-index
11
Scimago
Journal Rank
0.249
Scimago Quartile Score Architecture (Q2)
Engineering (miscellaneous) (Q3)
Environmental Engineering (Q3)
Information Systems (Q4)
Management Science and Operations Research (Q4)
Materials Science (miscellaneous) (Q3)
Scopus  
Scopus
Cite Score
2.3
Scopus
CIte Score Rank
Architecture (Q1)
General Engineering (Q2)
Materials Science (miscellaneous) (Q3)
Environmental Engineering (Q3)
Management Science and Operations Research (Q3)
Information Systems (Q3)
 
Scopus
SNIP
0.751


International Review of Applied Sciences and Engineering
Publication Model Gold Open Access
Submission Fee none
Article Processing Charge 1100 EUR/article
Regional discounts on country of the funding agency World Bank Lower-middle-income economies: 50%
World Bank Low-income economies: 100%
Further Discounts Limited number of full waiver available. Editorial Board / Advisory Board members: 50%
Corresponding authors, affiliated to an EISZ member institution subscribing to the journal package of Akadémiai Kiadó: 100%
Subscription Information Gold Open Access

International Review of Applied Sciences and Engineering
Language English
Size A4
Year of
Foundation
2010
Volumes
per Year
1
Issues
per Year
3
Founder Debreceni Egyetem
Founder's
Address
H-4032 Debrecen, Hungary Egyetem tér 1
Publisher Akadémiai Kiadó
Publisher's
Address
H-1117 Budapest, Hungary 1516 Budapest, PO Box 245.
Responsible
Publisher
Chief Executive Officer, Akadémiai Kiadó
ISSN 2062-0810 (Print)
ISSN 2063-4269 (Online)

Monthly Content Usage

Abstract Views Full Text Views PDF Downloads
Feb 2024 0 9 3
Mar 2024 0 4 3
Apr 2024 0 9 2
May 2024 0 5 3
Jun 2024 0 5 2
Jul 2024 0 10 1
Aug 2024 0 0 0